Hub Centric Ring Question
I'm going to be mounting a set of RX8 wheels on my SVX. I got the proper measurements, and purchased a set of hub rings to adapt them to fit the SVX properly. Here is my question:
The hub rings stick up over the surface of the wheel which would be sitting flush with the brake. (They have a tapered end.) It's probably about 1/32nd of an inch. Am I missing something here, or should I be grinding this additional space off of the hub rings? |
Re: Hub Centric Ring Question
No need to grind them. Just slide them on so the bigger side is facing the rotor. It works for me.
|
Re: Hub Centric Ring Question
The hub centric rings I purchased fit flush with the wheels I bought. I have some others for another set of wheels for our Baja and they fit flush as well. I don't think there should be anything above the mounting surface of the wheel. I'll try and take some pics.
|
Re: Hub Centric Ring Question
Quote:
That's the way they are made - no worry ..... Harry |
Re: Hub Centric Ring Question
Excellent! Thanks everyone!
|
Re: Hub Centric Ring Question
Here are some pics of my hub centric rings: Baja wheels
http://i494.photobucket.com/albums/r...x/IMG_0948.jpg SVX wheels http://i494.photobucket.com/albums/r...x/IMG_0944.jpg |
Re: Hub Centric Ring Question
i think i need some centric rings what size is the hub of our cars ? im going to go to the tire shop as soon as i get paid and get some
|
Re: Hub Centric Ring Question
I had this from another thread.
Hub Rings for the SVX are 56.1 ID and 72.62 OD Gene |
Re: Hub Centric Ring Question
thanks bwb3 i thought the id was 56.1 or 56.15 but wasnt sure and the od would depend on the rim of choice though wouldn't it ?
|
Re: Hub Centric Ring Question
Yes, the outer diameter depends on the rim you choose, as there are many different wheel center bores.
|
Re: Hub Centric Ring Question
well i found the bore of my rims to be 60 mm and eBay doesn't sell them that size :( and i don't want crappy plastic or aluminum ones that id have to get shipped from America or china or damn it y cant there be rim shops nearby that have them without having to do the same and order them from god knows where . So my dad is going to make some for me out of perfect size aluminum tube he has laying around :D :lol:
|
All times are GMT -6. The time now is 08:56 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122