350z wheels... will they fit?
 

I thought the 350Z wheels were stagered< so the rims were of diffrent widths, so you couldent really fit the same size tire?

If you find out the bolt pattern, offset, and width, then we can tell you.

Found on a 350z site.

Could you check the site again. The guy on Ebay says there 18". He probubly got a special wheel package. (What kind of moran pays for a wheel upgrade than replaces them?)

you could get four front 350Z wheels.....

the new '35th Anniversary' 350Z wheels are really nice, but probably way expensive, as factory ones usually are.

http://www.rsportscars.com/foto/06/3...05_01_1024.jpg

I dont know, i just googled, and it came up with that.

350Z's can be had with 17" or 18" wheels from the factory depending upon the model. The 18" wheels from the Track model are forged aluminum 6 spokes made by Rays Engineering, maker of Volk wheels. The 17" are cast aluminum. All are staggered with widths running between 7" and 8.5" and all BCP are 5x114.3mm.

Offsets are low for our car. My wife's G35 (same Nissan FM platform as the 350Z) uses 7" wide wheels with a 35mm offset.

Todd