How do I install a new shift module?
Seems simple, but....can anyone provide directions on how to remove console so I can install a shift module I bought on ebay? I'm tired of pressing the shift lock everytime I drive....thanks, mk
|
Re: How do I install a new shift module?
Quote:
Mine has been on red and I have had to push the shift lock button ever since the day our new neighbors moved in. With our SVX's we get it all!!! I love it! Hope this helps. Keith:) |
Re: How do I install a new shift module?
There are 2 long trim panels that go along the bottom of the cigarette lighter and ashtray. pry these off and you will see 1 gold screw on each side you need to remove. Next take the shifter bezel off by removing the ashtry so you can lift up on the bezel, also unhook the door lock switch if you have one. Remove the screws at the bottom of the console when you open up the lid at the top. Remove the E-brake handle. then slide the whole console back towards the rear seat a little and then pull up and its off. the shift module shoudld be behind the Ebrake if I remember right.
|
All times are GMT -6. The time now is 01:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122