Custom 165 shot Nitrous Kit 4 sale
 

I am selling my Nitrous kit that I had bought from Subafreak. I ran it twice with no real luck either time. The first time I didn't purge my fuel solenoids and ran really lean and backfired. The second time, my MAF was messed up due to the backfire so it didn't work well but it still pulled like nothing I have ever felt!! Either way, I will be selling this with or seperate from the stage2v5 ECU chip.

Kit contains a custom throttle body plumbed with hardlines by Subafreak pictured below
http://www.subaru-svx.net/photos/fil...sSVX/35528.jpg

Also includes a purge solenoid that I added to the systemhttp://www.subaru-svx.net/photos/fil...sSVX/35247.JPG

Comes with a 10lb tank and plenty of stainless steel hose to go back to the trunk. Tank brackets included
http://www.subaru-svx.net/photos/fil...sSVX/35527.JPG

I will mark all of the wires so wiring will be a snap. Install is really easy if you have a good amount of car knowledge and since you are getting a full throttle body minus the sensors, it will make life that much easier for you. I am asking $700 for the kit w/o the ECU, $1000 with it. You will need to get another Z32 MAF for the Stage 2v5 and I am also selling it seperately as well. Please only serious questions

Tom

Why you selling out Tom? Trying to generate a little cash for the Stage III?

Can the kit be jetted to drop to a safer shot - around 100hp or so?

yes it can just talk to NOS and have them send you smaller jets. All it is is threaded into the TB.

Tom

I'll take it. :D
Sending you a PM now.

Do you want the stage 2 ECU as well?? It is best if you run the 5 degree retard for less chance of detonation

Tom

I already have stage 2 installed so just the nitrous kit. :)

So I guess I'll need to hook up that little wire from the chip to something?

You just need to hook up the wire to the wire labeled on the kit thats all. Like I said, when I pull it on Monday for you I will label what the wires do. There is also a diagram that LAN made up in my locker for it

Tom

Awesome.
Paypal on it's way.
Take your time pulling it I am in no hurry. :)

You guy's are talking about 2 different Stage 2 setup's, you realize that right?

I know that Mike. I have spoken with Longassname prior to my installing my kit to find out if the timing codes were similar and if it would be safe enough to the run the higher shot. With some thinking we found it would be safe to run the larger shot as long as the timing retard was used. So in essence it is a very similar chip with the utylization of the z32 MAF

Tom

That was my question. Does Imortals Stage 2 have the ability to retard the timing? Or does he need your software.

yes, he has the same stage 2 I had

Tom

yeah I have stage 2 v 5 with the z32 maf. :)

How much are you looking to get for the ECUtune stage 2v5 and will it come with the z32 connector?