New bike is coming together (pics)
Got the cafe racer I'm building somewhat together for mock up and determining what needs cut off etc.
The tank that is going on it will be 70s bowling ball orange, black and white. I'm thinking of painting the exhaust guards (which aren't on black), seat frame white with a black high density foam on top, frame white and then all the motor mounts, front fender and chain guard black. What cha think? http://s185.photobucket.com/albums/x.../Cafe%20CB175/ |
Re: New bike is coming together (pics)
10 characters.
|
Re: New bike is coming together (pics)
Quote:
|
Re: New bike is coming together (pics)
Looking good Ben!
|
Re: New bike is coming together (pics)
Quote:
|
Re: New bike is coming together (pics)
10 characters.
|
Re: New bike is coming together (pics)
It'll weigh about 210 wet. Handlebars are the standard aftermarket "clubman" bars which are shortened 2.5 inches on either side. In effect they move the grips on the bars forward about 2 inches and down about 4 inches from the top of the triple tree (fork mount to frame). Long term I'm planning some mild cams and uping the compression to about 11.5 to 1. This should put HP ouput very close to 30hp (stock is 20hp) and top speed of about 105 at 12k in fifth! Then do some AMARA racing and take it for the 600 mile lake erie loop race around lake erie. It won't be a comfortable ride
Quote:
|
Re: New bike is coming together (pics)
10 characters.
|
Re: New bike is coming together (pics)
Quote:
In other words it sounds just about the same as any even firing twin at 10k. |
All times are GMT -6. The time now is 01:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122