Dyno Oct 2018
 

So this is basically a stock engine, I have a cold air intake I have ported and polished the intake manifold, runners I have true dual exhaust with 2.5 inch pipe each side. increased fuel pressure, 340lph fuel pump, stock injectors and a Maf bypass to allow unmetered air in. ECUtune stage 1, the latest. http://localserver.no-ip.biz/Public/...tune%20ecu.jpg

Temps mid 80F Humid, rainy day, 4 pulls total, the first was to set up the RPM and everything running, the first pull the power and torque numbers are off because the machine wasn't dialed in yet with the rpm numbers. http://localserver.no-ip.biz/Public/...%20Numbers.jpg

and a couple youtube video's