wiring diagram tranny
Can some one help me whit wiring diagram on the contact on the auto tranny for a ''germany'' car. I need to find the speed sensor. :)
|
Re: wiring diagram tranny
Looking for the same thing...
|
Re: wiring diagram tranny
Quote:
What else do you need? Harvey |
Re: wiring diagram tranny
Sorry little late answere.
But i need to get my speedo to work. This was this i have problem whit when i try to build auto tranny from us over to a european car. I do a 5mt swap. And on my auto tranny i dont have a speed sensor in the front diff like yours. So i cant swap this over.:( |
Re: wiring diagram tranny
I have find my old topick. And i have try that b3lha.
This option : Install the SVX 3-wire speed sensor in the 5MT gearbox. pin 1 (YR) is the signal wire. pin 2 (BW) connects to ground -->i have try this right from the batteri pin 3 (RW) connects to 12v ---> this i have just some place in the engie room. Remove the YR wire from pin C6 of the TCU plug and connect it to the signal wire of the speed sensor. But the speedo dosen work. And must the old tcu bee there? |
Re: wiring diagram tranny
Sorry folks i have take wrong. I have switch the posetiv an signal cable.
I find this out today and now my speedo works.:) |
Re: wiring diagram tranny
[QUOTE=Alex-svx;704827]Sorry folks i have take wrong. I have switch the posetiv an signal cable.
I find this out today and now my speedo works.:)[/QUOTE So glad that you finally got the speedo to work Alex, it's been a long time. :) Harvey. |
All times are GMT -6. The time now is 09:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122