tranny pan
 

2 ?'s torq specs on tranny pan and looking for shop manuel.

Re: tranny pan
 

It's all here for a 1992 USM SVX

http://phantomotaku.com/SVX/

Tapani

Re: tranny pan
 

.

Transmission pan bolt torque: 2.5-3.3 ft.lbs

Using an inch-pound wrench, that would be 30-39.3 in. lbs

There are 16 pan bolts. If you lose or break one, the part number is 800506320



http://www.subaru-svx.net/forum/atta...1&d=1333167723


.

Re: tranny pan
 

Fixed it for you, "Hop Along"!:p

Re: tranny pan
 

Never believe everything you read on the subaruparts.com website. They said 16, but count the holes in the basket drawing.

.

Re: tranny pan
 

20 each 10mm, that's what kept my tranny pan in place. Next mystery: R & R the internal filter:eek:

I only drained about 5 qt's of atf, I have 2 big coolers & a big spin on filter, I figure 12 qt's total. I'll put in 5 new qts & cross my legs....

The interior of the tranny pan was extremely clean, no sludge or foreign particles, that tells me the spin on filter does a good job.

After 12 years & 56k miles the atf is still pink for the most part, that would be ROYAL PURPLE synthetic boys & girls......:D

Far as I can determine this tranny is a "numbers matching" original, no rebuilds!:woo: