Engine harness cost?
Anyone know how much the engine wirirng harness is? I'll call the dealer on Monday but I was curious as to what the damage is going to be.
The wires that go the the crank and cam sensors are so brittle they are cracking. The knock sensor connections aren't so hot either. I don't feel good about using it. |
As per
http://www.subaruparts.com/diag/?mod...category=091-A It's $231+shipping for a brand new harness |
I would have thought it would have been more. Yes, it is expensive, but that control many things. :)
|
looks like I'll be doing some splicing.
|
Right on, mine were trashed too. Splicing is the answer. How's the SVX?
|
Cam timing.
How did the cam timing work out? any problems.?
Harvey.;) |
What harness?? The engine harness or the ecu to engine harness??
Tom |
harvey,
Thanks again. I got the cam timing right and I was able to preload the sub gear on the cam sprocket. svxcuseme, Things are moving slowly. I was putting in 20 hours a week at work when I first got the car so I had plenty of time. Now work has really statred to pick up so things with the car have slowed down. Tom, Its the harness that goes to the knock, crank, cam sensors. Part Number: 24020AA950. You don't happen to have an extra? |
sorry I don't
Tom |
All times are GMT -6. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122