this was an interesting concept for new svx headers
|
Re: this was an interesting concept for new svx headers
Not seeing much of an advantage over stock other than separate runners. Not sure if you'd have any bottom end left with these..
Bill |
Re: this was an interesting concept for new svx headers
Quote:
|
Re: this was an interesting concept for new svx headers
keep thinking about getting a set of these but ask if they can make them far enough down to clear the cross member.
http://www.outfrontmotorsports.com/primary_tubes.htm |
Re: this was an interesting concept for new svx headers
Quote:
|
Re: this was an interesting concept for new svx headers
Quote:
|
Re: this was an interesting concept for new svx headers
^Those primaries are still too short
|
Re: this was an interesting concept for new svx headers
I want these for my 3.0R but I can't imagine how $$ they would be for the SVX.
http://www.raptorsc.com.au/kits.php?id=70 They are selling for about $655 USD for about a 15% performance boost (w/tune) |
Re: this was an interesting concept for new svx headers
how different is an ez30 exhaust flange?
|
Re: this was an interesting concept for new svx headers
Completely different. The 3.0/3.6 exhaust port are spaced equally, not like our 2 together/1 lonely arrangement.
|
Re: this was an interesting concept for new svx headers
oops duplicate
|
Re: this was an interesting concept for new svx headers
I just posted to show what was available by one company to a somewhat small subaru market (EZ30) and slightly daydreaming that one would ever be made for the SVX
|
Re: this was an interesting concept for new svx headers
They won't be any good in a car. The outlets will either point straight at each other or straight at the tires.
|
All times are GMT -6. The time now is 01:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122