Turbo SVX project part out
 

turbo project part out:

custom intercooler for a vf series subaru turbo
almost complete wiring for a 2004 STi engine transplant
custom 6 speed driveshaft that fits the R-180 rear
headlights
interior bits
other misc parts

Re: Turbo SVX project
 

Would you send me your VIN? Thanks :)

Re: Turbo SVX project
 

Why did you throw in the towel?,
It looks like the engine was mounted, etc.

Re: Turbo SVX project
 

yeah, engine and trans is mounted. i have other projects going on now, i just dont have the time anymore. sucks

Re: Turbo SVX project
 

isn't this possibly the first sti swap in an svx ?

Re: Turbo SVX project
 

what exactly is left on the wiring harness?

Re: Turbo SVX project
 

i had it run for about 15 sec then a fuse blew. this was after about 5 steady hours of wiring work. after that we called it a day and never got back to it. if you know wiring or someone that does, this is an easy fix. the guy that was helping me out moved away from the area.

Re: Turbo SVX project
 

it has a trunk mounted battery also. (not included, just the wiring that has been run)

Re: Turbo SVX project
 

So, just to clarify, the engine shown in the pics is NOT included? Is it still in the car? How much extra for the engine?

Re: Turbo SVX project
 

correct. engine, trans, rear not included. engine has been spoken for. thanks

Re: Turbo SVX project
 

You have the STi ECU included?

Re: Turbo SVX project
 

yes. its wired for a 2004 sti engine/ECU so you dont have to mess with the inhibitor.

Re: Turbo SVX project
 

That car is sick. What kind of rims are those? How much money is needed to complete the job if you do it yourself? How much money would you charge to complete the job?

Re: Turbo SVX project
 

You might consider posting some fresher pictures to show exactly what's there and what's not?

Re: Turbo SVX project
 

sorry, dont have the room or time right now to finish it.

yeah, as soon as i get some time i'll take some and post them. thanks

Re: Turbo SVX project
 

front axles (fits 6 speed trans)
rear axles (fits R-180 rear)
intercooler for a VF-39 (sti type turbo)
custom fabrication to the engine crossmember to allow up-pipe clearance
2004 STi main harness merged to the stock svx one
2004 STi ECU

headlights


here are some new pics:



http://i129.photobucket.com/albums/p...oolersmall.jpg

Re: Turbo SVX project
 

bump. any interest? price is b/o

Re: Turbo SVX project
 

make some offers, this needs to go. otherwise i have to part it out.

Re: Turbo SVX project
 

Dibs on the crossmember and shifter.

PM sent...

Re: Turbo SVX project
 

Payment sent...

Re: Turbo SVX project
 

crossmember and shifter sold. someone take the whole car for $1000 from me.

Re: Turbo SVX project
 

car will be dismantled this weekend unless anyone wants it whole. after that ill post a list of items that are available. thanks

Re: Turbo SVX project
 

I'd like to buy the little clips that hold the seatbelts to the sides of the seats, if possible. With them being broken, it's a real pain to fasten the belt!

Re: Turbo SVX project
 

How much for the rearview mirror to 77070 - Houston, TX?

Re: Turbo SVX project
 

snow is gone, warmer temperatures are here. I'll be dismanteling the car in the very near future. All parts will be available. The rear hubs had new bearings installed by Rallispec. If anyone needs a rust/dent free chassis with clean title, this is the one. pm/ or post your needs. thanks

svx parts
 

now have the following parts ready to ship:

headlights
front hubs
rear hubs (brand new bearings installed by Ralispec (never driven)
all 4 brake calipers
all 4 brake rotors (brand new cross drilled)
front fenders (left and right)

make offers, not tring to break the bank for these parts, multiple part discount and pick up available. (nj)

Re: Turbo SVX project
 

How much for brake calipers and rotors?
Also is the steering wheel in good condition?

Re: Turbo SVX project
 

updated the parts available in post #26