Part #'s needed

[KEVINL]

I need the part #'s for the rear diff mount bushings for a 1992 SVX
and the external transmission filter

[Chad]

One place you might look is subaruparts.com

It has helped me out.

www.subaruparts.com/accessories.php (http://www.subaruparts.com/accessories.php)

[Aredubjay]

Originally posted by KEVINL
I need the part #'s for the rear diff mount bushings for a 1992 SVX
and the external transmission filter

If you haven't found them by the time I get to work tomorrow, I'll look them up for you then.

[Aredubjay]

Originally posted by Aredubjay


If you haven't found them by the time I get to work tomorrow, I'll look them up for you then.

Part # for the right is 41322AA010, Left is the same. ATF filter kit is 31099AA091. Did you need the retainer bushings also: Lower, both right and left are 41324PA000, and upper, both right and left are 41324PA010.

[KEVINL]

Thanks for the numbers what are the retainer bushings

[Aredubjay]

Originally posted by KEVINL
Thanks for the numbers what are the retainer bushings

They are the "caps" that go on top of and under the bushing that fits in the differential cross member.

[KEVINL]

couple of questions are these part numbers for one only meaning I need to order 2 of each except the trans filter

BTW 41324PA010 is not a valid part number

[Aredubjay]

Originally posted by KEVINL
couple of questions are these part numbers for one only meaning I need to order 2 of each except the trans filter

BTW 41324PA010 is not a valid part number

You are correct, sir. There is a right and left for each of the parts.

Don't understand why they wouldn't recognize that part number, unless they've discontinued it. I took it directly from the OE parts catalogue for the 92-94 SVX. Hmmmm.

[KEVINL]

Thanks for your help

[Aredubjay]

Originally posted by KEVINL
Thanks for your help

Always a pleasure. Any time.

[Aredubjay]

Kevin,
It's been brought to my attention that I may have been misunderstanding the part numbers you actually need. Go here:

http://y42.briefcase.yahoo.com/bc/kuoh3/lst?.dir=/My+Photo+Album&.view=l&.src=bc&.done=http%3a//y42.briefcase.yahoo.com/bc/kuoh3/lst%3f.dir=/My%2bPhoto%2bAlbum%26.src=bc%26.view=l

And check out the diagram with part numbers. Also, theres a wealth of other info on the rear diff mounts. Sorry if I led you astray.

(Thanks Kuo! :D )

[KEVINL]

I need the mount shown in the picture with the yellow box circling them my Rwd conversion finished them off

[Aredubjay]

Originally posted by KEVINL
I need the mount shown in the picture with the yellow box circling them my Rwd conversion finished them off

Then, yes, I lead you astray. I was giving you the pn's for the crossmember bushings (but it was the only thing in my catalogue listed as diff mount bushings). My catalogue doesn't have the trans and diff diagram for some reason. the PN for the diff mounts that you need are on the diagram in Kuo's briefcase.

[zsvx]

I'm looking for the part numbers for the front tow hooks. I can't find these anywhere on subaruparts.com (of course I found a bunch of other stuff to spend money on there :rolleyes: )

[Aredubjay]

Originally posted by zsvx
I'm looking for the part numbers for the front tow hooks. I can't find these anywhere on subaruparts.com (of course I found a bunch of other stuff to spend money on there :rolleyes: )

My catalogue is at the office. I'll look them up for you Monday, unless someone else posts before then . . . that is, if they're available. I need mine straightened.

[KEVINL]

Thanks for all your help I am glad you had me point out the part I needed cause it would have been $100 for parts I didn't need

[Aredubjay]

Originally posted by KEVINL
Thanks for all your help I am glad you had me point out the part I needed cause it would have been $100 for parts I didn't need

Yeah, sorry about that. You have KuoH3 to thank. He "lurks" here and had replaced those same bushings and e-mailed me personally with the suggestion. I would have hated it if I'd caused you to spend needless money. I'm glad all is working out, though. Hope you get things back to "normal."

[Aredubjay]

Kevin, don't forget to order new nuts for your mounts. They're not supposed to be re-used.

ZSVX, sorry, the tow hooks are part of the "impact bar." You'd have to order the whole unit.

[KEVINL]

Well did you have any luck finding the part numbers

Thanks

[Aredubjay]

Originally posted by KEVINL
Well did you have any luck finding the part numbers

Thanks

Dude, the part number for the mount was listed on the diagram I linked you to (41322PA000). As for the nuts, sorry, I don't know. The number on the diagram is kinda fouled up. You might e-mail KuoH3, or post on the Yahoo site asking him for the number of the nuts.

[KEVINL]

Thanks for the info it is a valid part number I assume this is for one of the bushings meaning I need to order 2

[Aredubjay]

Originally posted by KEVINL
Thanks for the info it is a valid part number I assume this is for one of the bushings meaning I need to order 2

Yes.