View Full Version : Mild build
cruisen_15
07-24-2012, 08:41 PM
started building an eg33 for my gc8. Pistons came in today!
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/539047_504912182868621_139318221_n.jpg
heres my IMP
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/292501_436008686425638_455113667_n.jpg
Tapani
07-24-2012, 09:57 PM
Great !
What's the plan?
Tapani
cruisen_15
07-24-2012, 10:06 PM
well just really wanted a daily driver and weekend racer, ill get more pictures up of the parts I already have.
RojoRocket
07-24-2012, 11:19 PM
[QUOTE=cruisen_15;708753]started building an eg33 for my gc8. Pistons came in today!
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/539047_504912182868621_139318221_n.jpg
/QUOTE]
OOOOOOO!! PURRRTTYYYYY!!!!
Glenn
bazza
07-24-2012, 11:44 PM
started building an eg33 for my gc8. Pistons came in today!
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/539047_504912182868621_139318221_n.jpg
heres my IMP
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/292501_436008686425638_455113667_n.jpg
Niiice. Out of interest, what pistons did you order ie - compression ratio and offset and diameter?
cruisen_15
07-26-2012, 09:17 PM
pistons are for the ej22. block is at machine shop now, full rotating assy balanced, polished crank, block decked bored and honed. once my short block is back ill move onto the heads.
cruisen_15
09-06-2012, 03:06 PM
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/240933_525724670787372_1910143336_o.jpg
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.