Scranton area roller

[michael]

Just got the go ahead on extra storage space so I'm looking for an Svx project to replace my 96 outback dd. I have all the time in the world to get it fixed up. $ is the issue. Let me know watcha got.

[Hocrest]

TJ has his parts car shell...

[michael]

I'm assuming you mean httrdd. I sent him a pm. Hopefully there is something left after all the parting out.

[Conn SVX]

I would think you want more than a shell . There was a guy in your area selling a silver with a blown 5speed and it needs some cosmetic etc. I will try to find it . Try this . If I was closer I would take a look at it . I don't know how close you are . Needs work but sounds like a worth wile project . http://svxworldforums.com/forum10/3585.html

[httrdd]

I'm assuming you mean httrdd. I sent him a pm. Hopefully there is something left after all the parting out.


Sent back.

[Conn SVX]

I came a cross one in VT . A long ride but it looks like it would clean up nice . I have an email for him . CMCAUTOWORKS@AOL.COM If he doesn't send you pictures I have a few I can e mail you if you send me your address.

[1986nate]

I would think you want more than a shell . There was a guy in your area selling a silver with a blown 5speed and it needs some cosmetic etc. I will try to find it . Try this . If I was closer I would take a look at it . I don't know how close you are . Needs work but sounds like a worth wile project . http://svxworldforums.com/forum10/3585.html

I already have a deal set up on that one....

[Conn SVX]

Well there is also that one in Westport ,Conn. 5 speed and it runs . needs tires and brakes and paint , no dents or rust . Interior is good . that's only about 2 1/2 hours from you Bordeaux or Claret .. got to be claret it is a 92. he was asking $1,500 i think he will take $1,200

[Hocrest]

I already have a deal set up on that one....
Of course you do... :rolleyes: :D

[1986nate]

Of course you do... :rolleyes: :D

:D


.......

[subeman90]

Just I'm looking for an Svx project to replace my 96 outback dd.

so is the outback forsale? If so PM me details.

[michael]

When the new svx runs for a week straight without breaking down :D

[Conn SVX]

Must be a nice OB.. Oil not even cold and they are jumping on it :rolleyes:

[1986nate]

When the new svx runs for a week straight without breaking down :D

Is that possible??? :p

[subeman90]

Is that possible??? :p

see I thought that too. :lol:

[subeman90]

Must be a nice OB.. Oil not even cold and they are jumping on it :rolleyes:

I just happen to be looking for one. Is that ok with you? :mad::rolleyes:

[Conn SVX]

Chill my friend it is an old joke .

[benebob]

Chill my friend it is an old joke .


He's just a little sensitive today. He drove past an Aztek convention and the pointing, laughing and galking at his Baha got to him.;)

[subeman90]

He's just a little sensitive today. He drove past an Aztek convention and the pointing, laughing and galking at his Baha got to him.;)

hey I was at the hardware store today: this reminded me of you.
http://images.orgill.com/200x200/6834287.jpg

[Conn SVX]

Was it Lowe's We have them in 3 colors for $1.99
BTW I don't get it ! ! ! Door stop? Wedge?

[benebob]

hey I was at the hardware store today: this reminded me of you.
http://images.orgill.com/200x200/6834287.jpg

At least you found something that you might be able to fit into that bed of yours.:lol:

[subeman90]

At least you found something that you might be able to fit into that bed of yours.:lol:

I'll remember that the next time you need to borrow it. :p

[subeman90]

Was it Lowe's We have them in 3 colors for $1.99
BTW I don't get it ! ! ! Door stop? Wedge?

it is a hack at his TVR. do you have it in Red?

http://www.productioncars.com/send_file.php/tvr_tasmin_conv_red_front_1984.jpg

[michael]

hey I was at the hardware store today: this reminded me of you.
lol 123456

[1986nate]

Micheal, How much of a roller are you looking for, aka, how complete, how much work, etc. I have a few in different stages and with a new opportunity coming along for me, I won't exactly have all the time in the world (not that I do currently anyway:rolleyes: ) . I currently have 4 "big" project SVXi that I have to put back on the road. PM me if interested at all and I can tell you details on each of them. (PS, will be coming out to PA again the end of the month, beginning of Nov.

[michael]

Dead or missing trans and/or engine. Anything more is a plus. Sub $500 pricetag a huge plus. Moderate body damage acceptable preferably to areas that can be removed and replaced.

[1986nate]

Dead or missing trans and/or engine. Anything more is a plus. Sub $500 pricetag a huge plus. Moderate body damage acceptable preferably to areas that can be removed and replaced.

That is definitely doable. I'll finally be back home in like 4 days I think, and can get some pics of the couple I have. I have 2 in mind.

[benebob]

I'll remember that the next time you need to borrow it. :p

A bad arab thief can hand count how many times I've borrowed a vehicle from you.:eek: Especially one which has a bed smaller than 2 out of 3 of my trunks.:lol:

[subeman90]

I've offered it many times for scooter pickup. :p

[95greensvx]

If you are interested I have a roller that I was going to fix up and get back on the road but I just don't have the time to get it done and I'd rather see it get fixed up than sitting in my driveway for years to come. It's a 92 with 119k on it. The engine is out of the car as I planned to rebuild/reseal the engine. The body will need some paint work and the driver's side fender has a small dent in it from the door catching it. I'm off I-80 not too far away from Scranton if you are interested.