Recent Exhaust upgrade Pics.

[92 SVX]

As title says here are some pics of my exhaust. These tips seem to closely resemble the factory, which I wanted.
http://localserver.no-ip.biz/Public/SVX%20Exhaust%20and%20tips.JPG

http://localserver.no-ip.biz/Public/SVX%20Exhaust%20and%20tips%20(2).JPG

http://localserver.no-ip.biz/Public/SVX%20Exhaust%20and%20tips%20(6).JPG

[Blacky]

More pics, more pics...

[Freeman]

More pics, more pics...

I agree! And some details! Oh and cost :p

[92 SVX]

Ok, More pics and details.
I went in and got the exhaust finished up today. It was those 24" or so Glasspacks and then out the back. Now I have a couple of Magnaflows as well. It is quite a bit quieter then I expected but it sounds good I think and no drone.
http://localserver.no-ip.biz/Public/SVX%20Dual%20Exhast%20with%20Magnaflows.JPG

http://localserver.no-ip.biz/Public/SVX%20Dual%20Exhast%20with%20Magnaflows%20(1).JPG

http://localserver.no-ip.biz/Public/SVX%20Dual%20Exhast%20with%20Magnaflows%20(2).JPG

and here is a before and after vid.
http://www.youtube.com/watch?v=M7ndJNtLs5Y

http://www.youtube.com/watch?v=gpQueCIrHxw

[92 SVX]

Is there no way to embed the video so you dont have to click a link and leave the forum?

Oh and cost, well it was 260 with tips the first time, just the glass packs.
Then today it was another 250 for the magnaflows and labor.
If I had done all of it at once I think I would have saved over 100 and probably almost 200 if I had not bothered to put the glass packs in.

[Blacky]

Nice. I'm looking at doing both mine in the spring. Mine is rotting and my daughter's has a Ricer single exhaust installed by the previous owner.

[svxcess]

Is there no way to embed the video so you don't have to click a link and leave the forum?Done.

For future reference, here is how to do it:

To the right of the youtube video, you will see a SHARE icon

Double-click and copy only the part of the link that is shown in red .https://youtu.be/gpQueCIrHxw .or whatever letters/numbers come after the last forward slash.

In the network message box, click on the red youtube icon on the far right (above the message box)

Paste the copied embed code where the blinking cursor is. That's all there is to it.


M7ndJNtLs5Y&hl

gpQueCIrHxw&hl


.

[92 SVX]

Done.

For future reference, here is how to do it:

To the right of the youtube video, you will see a URL and an Embed box.
Double-click and copy the entire link shown in the Embed box.
In the network message box, click on the red youtube icon on the far right (above the message box)

Paste the copied embed code where the blinking cursor is. That's all there is to it.



<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/M7ndJNtLs5Y&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/M7ndJNtLs5Y&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>


<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/gpQueCIrHxw&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/gpQueCIrHxw&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>


.
Oh wow, I did not even notice that icon. thanks.

[92 SVX]

ok about a week later souds different

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/QvXRN1oFXx4&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/QvXRN1oFXx4&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[Blacky]

Seems to have a lower throatier sound now. I like it!

[92 SVX]

So do I Thank you.

[Alex-svx]

Its looks grate to have 2exhaust pipes on the car. :)

Do you have some pictures of it from the front of the car?:rolleyes:

[92 SVX]

Its looks grate to have 2exhaust pipes on the car. :)

Do you have some pictures of it from the front of the car?:rolleyes:

I think this might be what you mean if not then I do not understand what you said.
http://localserver.no-ip.biz/Public/SVX%20Dual%20Exhast%20with%20Magnaflows.JPG

[lhopp77]

I think this might be what you mean if not then I do not understand what you said.
http://localserver.no-ip.biz/Public/SVX%20Dual%20Exhast%20with%20Magnaflows.JPG

Guess he is interested in a pic that includes the manifolds back. :)

Lee

[92 SVX]

Unfortunately that is the closest to manifolds back that I have. If I have my camera and remember next time I have my car on a hoist I will do so.

[Alex-svx]

I mean from the engine and out?:rolleyes:

[92 SVX]

If I have it on a hoist, and have my camera I will. Though what your seeing is very close to the engine, less then a foot I believe.

[Alex-svx]

Ok, I just was woundring if you just cut from the manifold and start the exhaust from there. Or how you have done it. I really want to twin exhaust on my car too. :D

[92 SVX]

Ok, I just was woundring if you just cut from the manifold and start the exhaust from there. Or how you have done it. I really want to twin exhaust on my car too. :D

ok I understand. well I had the exhaust guy cut the pipe before the connection to the single. Which means to do trans work it needs to be unbolted at the manifolds now. Without more extensive customizing this is the easiest way, otherwise you fabricate o2 bungs and such.

[Alex-svx]

ok I understand. well I had the exhaust guy cut the pipe before the connection to the single. Which means to do trans work it needs to be unbolted at the manifolds now. Without more extensive customizing this is the easiest way, otherwise you fabricate o2 bungs and such.

Ok thanks for the help. :)
I will take a look on my car when it fhinish whit the 5speed convert. :D

[svxcess]

ok about a week later sounds different

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/QvXRN1oFXx4&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/QvXRN1oFXx4&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>


Fixed it as per my instructions HERE (http://www.subaru-svx.net/forum/showpost.php?p=635565&postcount=7)

QvXRN1oFXx4&hl

.

[92 SVX]

Wow this is an old topic, my exhaust has gone through several changes since that point. First I completely redid all the piping from the stock header all the way back is now 2.5 inch diameter, the glasspacks are pushed forward to about the stock precat locations, V-band clamps behind these with v-band clamps mounted by the rear axles as well so I can take a section of pipe out to work on things.

Here are a couple pictures right before the current setup, all 2.5 inch piping.
http://localserver.no-ip.biz/Public/2.5%20inch%20rear%20section%20old%20svx%20exhaust. jpg

http://localserver.no-ip.biz/Public/Front%202.5%20inch%20piping%20svx%20exhaust,%20old %20pic%20before%20V-band.jpg

[92 SVX]

here are a couple recent sound clips

1RqJsmZfB5I

q1marF0VvRI

qnnXXEPf7wE