Side Skirts and Front bumper

[Motorsport-SVX]

Im toying with the idea on making some side skirts
and front bumper cover Half Spoiler.
I have a set on hand and
have a great source for cloning them.
If I get enough interest or pre orders Ill go forward and
send them out to get done.

[ridered777]

http://www.klr650.net/forums/images/smilies/worthless.gif

:p Might be interested in skirts, depending on price and design. I'm going to stick with getting the 2 piece splitters for the front end though.

A rear lip/bumper would perk my interest though.

[Motorsport-SVX]

the sides would be the same ones made across the pond
or very very similar...

and the front probably this design mildly
changed.

I like our 2 pcs Splitters myself too...
lots in stock too !!

[DBOZ]

I would be interested in some skirts....Cause the stock ones just dont do it for me....front bumper also. I am looking for a kit that makes the car a little more badass. Love the rear of the car though.

[redlightningsvx]

for the front bumper would it be like a cover you just bolt on like the stock one or will you need to mold it to the bumper? i would like just replacing the existing cover and boltin on a new one than molding in a new one.

[ridered777]

Ones across the pond... KStaff? Or Cloud? I have to see if I can find some pictures of it...

found em...http://us.st11.yimg.com/us.st.yimg.com/I/svx-motorsport-accessories_2001_5365510.jpg

That front end doesn't do anything, like I said, the splitters look good, as long as you're lowered. Anything else looks too "ricey" and cow-catcher like, along with being big, bulky, and kind of "euro" looking.

In order to pass judgment on the sideskirts, I'd have to see them on an SVX, if you have any shots of that it'd be nice. I got that picture from your site, Dayle.

[SilverSpear]

I like those skirts :rolleyes:

[svxcess]

In order to pass judgment on the sideskirts, I'd have to see them on an SVX, if you have any shots of that it'd be nice. I got that picture from your site, Dayle.

Check this thread HERE (http://www.subaru-svx.net/forum/showthread.php?p=387120&highlight=skirts#post387120)

Here are some photos from the Delta Speed (http://www5a.biglobe.ne.jp/~delta_co/page01_3_4.htm) website:

http://www5a.biglobe.ne.jp/~delta_co/prodimage/prod07up12.jpg

http://www5a.biglobe.ne.jp/~delta_co/prodimage/prod07up13.jpg

http://www5a.biglobe.ne.jp/~delta_co/prodimage/prod07up11.jpg

http://www5a.biglobe.ne.jp/~delta_co/prodimage/prod07up15.jpg


and how they compare to the original prototype:

http://www.subaru-svx.net/photos/files/svxcess/255.jpg


.

[solarsvx]

i have a pair from dayle i love them !! along with the front splitters

[SVXMAN2001]

Dayle, If you can get the side skirts done reasonably soon count me in. I am having my svx restored and would love those skirts!

[Sov13t]

I am interested.

[svxpert]

<<Dayle, If you can get the side skirts done reasonably soon count me in. I am having my svx restored and would love those skirts!>>

+1 here also

[RSVX]

Didnt one of our members here already create the side skirts?

http://www.x35performance.com/

Just sayin... :rolleyes:

[SVXMAN2001]

Steve's side skirts have been "in development" for many years now, to my knowledge only one set (the one's on the red svx) have been produced...plus those are two piece...

[RSVX]

Steve's side skirts have been "in development" for many years now, to my knowledge only one set (the one's on the red svx) have been produced...plus those are two piece...

Doesn't really change my point now, does it?:p

[SVXMAN2001]

huh?.......

[Nevin]

I do like the looks of the front end on the blue car though. Very nice.

I'll have to bookmark that site.

And I have to say that yes, Dayle I would be interested in the side skirts. Would a certain number of people or a group buy or something help things at all?

[Motorsport-SVX]

in order the make the mold, I have to destroy a new set
of side skirts..
that, plus the cost of the molds themselves..
cost will be around $550-750 for the pair at the
moment.
Alot really depends on how many buy from the first batch.

[redlightningsvx]

What about the front bumpers?

[SVXMAN2001]

Dayle, can we get a reasonable timeframe? - Chris

[Motorsport-SVX]

half bumpers only and
est time frame from the time we get enough orders
4-6 weeks to make the molds and another few weeks to
get them built.

[YourConfused]

is there any chance of getting them made from something flexy, like poly?

[Motorsport-SVX]

always a chance, but for the sides it almost
not necessary.
Front would be nice, but more costly.
And personally I like how fiberglass takes on
paint better then urethane.
As it stands right now, we cant even get 5 people
to commit to making them out of glass.

[ridered777]

always a chance, but for the sides it almost
not necessary.
Front would be nice, but more costly.
And personally I like how fiberglass takes on
paint better then urethane.
As it stands right now, we cant even get 5 people
to commit to making them out of glass.

I love the skirts, but 550-750, plus shipping, is no amount to shake a stick at. I can't commit to anything at the moment - say you end up getting enough people in for an original mold, you going to keep selling them on your site indefinably?

[Motorsport-SVX]

just depends, going to play it by ear....

[Tim]

I'd definitely be interested in the side skirts later in the year depending on price. Are the originals made out of metal/aluminum?

[SVXMAN2001]

Bump, my car is almost ready for paint and would like to know the status on this project, would be nice to have the side skirts at the time...if this isn't going anywhere I am just going to go to delta directly

[Motorsport-SVX]

I just got in another set from Delta good in stock
but our cost went up since we bought our last set
since the value of the american dollar got worse ..

(thank you again GW asswad :) )

[SVXMAN2001]

So you have some in stock to sell? or are you using this one you just got to make the mold?

[Motorsport-SVX]

So you have some in stock to sell? or are you using this one you just got to make the mold?


I have a set in stock I can A sent out to get molds made
or B, sell off right now ..either way they judging by cost etc
of everthing, they wont be cheap..

[solarsvx]

i will couch for that !!!

[Tim]

But it looks amazing :)

[cozykat]

I have a set in stock I can A sent out to get molds made
or B, sell off right now ..either way they judging by cost etc
of everthing, they wont be cheap..

Hey Dayle!
If you go for making a mold on the side skirts and keep the cost around the lower end of $550, you can count me in.

Just let me know so I start setting some money aside. I'm in no rush as I'm busier than I'd like right now to play with my SVX but just wanted you to know that for $550, I'll buy some side skirts. I want them pretty bad but haven't been able to justify the cost. :lol: But who knows, give me a couple of months and maybe even $750 is possible for me.

I was kind of hoping they'd be of a more flexible material then fiberglass incase I have some idiot hit the skirt with their leg or door.

~Marisa

[Motorsport-SVX]

Hi Marissa !!

Ill be in touch :)

[Sov13t]

Dayle, do you check your e-mail... the dayle@motorsports..... one?

Sent you an e-mail, was wondering if you had a few items in stock. And you do not accept PMs through forums, so have no other way of contacting you :(

-Sov13t.

[Motorsport-SVX]

dont use that one anymore..
there are two current emails I do use on our
main website, www.planetsvx.com

send it to
motorsport_svx@yahoo.com

thanks buddy

[Johnybeas]

any chance you're still thinking about cloning that k staff bumper?? and if so what are you planning to sell the clones for??? what are the original ones made out of? are they fg???

[Motorsport-SVX]

get at least 6 people to committ to a set
and we can do it..
aprox price $450-550 , and made out of fiberglass..
urethane can cost that much, but we would have
to have a min of 15-20 units first to do it.

[Sov13t]

Sign me up for the side skirts!

As far as the bumper, I am really not feeling it at all... a bit too bulky for my liking. I definitely love the way the side skirts + splitters look, so that is what I will be going for.

-Sov13t.

[Motorsport-SVX]

thats cool, if we can get about 12-15 confirm to do the sides
Ill have them re-popped for much less then going direct....

[Johnybeas]

did you jus say 450-550 on a kstaff styliee bumper.... i think I jus creamed myself.... advertise it man... start another thread for a poss buy in. I would freakin run it on my credit card jus for that ****... that's like half the price you are sellin the other ones.... I bet a bunch of people would go down for them.

[Motorsport-SVX]

been there, done that...
never enough response...
alot of "interest" but once we ask for the half
down deposit up front and say it can take 2-3 months
for delivery, deposit non refundable, etc.. interest
drops and the project falls by the waist side.
Thats the projected price too, should be in that range
I can promise (plus shipping of course..)
Feel free to start the thread if you want getting people
onboard for either the front or sides and Ill stay on it.
But those are the rules for anyone willing to wait.
I promise quaility products like I have for years.

[Johnybeas]

how come it would still take that long for delivery if you are gonna be cloning them locally????

[Motorsport-SVX]

how come it would still take that long for delivery if you are gonna be cloning them locally????


Locally meaning in the USA
I still have to have someone make molds
and they have a list of people and parts ahead
of my stuff once we place the order.
It could take less time, but this would be worst
case scenerio...

Once we do the initial order, mold making etc, Ill
have them in stock on the shelf ready to ship
(but the price will be higher for having to inventory them)

[Johnybeas]

I see. well I'm sure there are quite a few people we just need to know for sure that someone is actually gonna throw down for a reasonably priced kit cause it seems like now a days every kit for the SVX is ridiculously expensive and a pain to obtain.

[Johnybeas]

so if say 6 people put down 225 each we could have a k staff clone in max of 3 months? at which time we put down another 250? is that solid???

[Francis]

....personally , side skirts + front bumper + snow = no good, so ...not for me ,but it look awesome

[cozykat]

Sign me up for the side skirts!

As far as the bumper, I am really not feeling it at all... a bit too bulky for my liking. I definitely love the way the side skirts + splitters look, so that is what I will be going for.

-Sov13t.

+1 for side skirts and splitters... if on the splitters were designed into the bumper... i don't like just sticking them on and having that outline on them...

Dayle, i'm still in for side skirts.. I am swamped at work right now and haven't had time to be very social but just send me an email or txt so I know when to pay. lo
Also sorry, I haven't called. I'm still searching for a MAF as mine went bad. I am going to try to fix it but i also like the idea of having a spare around.


p.s. I <3 side skirts.

[Johnybeas]

splitters = blehhh! IMHO I think they are a joke they look cheesey cause they are obviously tacked on aftermarket... and honestly I don't think do much to change the appearance of the front end. Personally I hate how beaked the front end of the svx is I think that if you add more front end it looks sexy as hell. Just my opinion though. So pretty much people are only down for the skirts now???

I will have my car in Utah in the snow too, but the way I see it I will be doing the suspension too so whatevz if it is really that big of a prob I'll raise it a bit... but I Like it low... specially in the summer it'll look hot.

Either way hit me if I don't catch the project actually goin down.

[Motorsport-SVX]

My side skirt molds are being done as we speak.
I started the process and Ill have 5 sets of skirts
available mid to late Nov. Its a done deal .
For anyone interested, they should contact me asap.
Est price for the pair is still around $450 for the pair
plus shipping.
S&H is $ due to their size and HD packing we have to
do to protect them.
These will be just like the originals, gel coated etc too.
Note: they wont come with any hardware etc because
the stuff from overseas was never offered with it.
Installation should still be smooth and seamless for a
experienced installer.

(maybe in Jan we will do one of the front half spoilers) :)

[Nevin]

Dayle, can you give people an idea as far as "shot in the dark" goes on shipping? Are you talking like... $200?

[Motorsport-SVX]

Dayle, can you give people an idea as far as "shot in the dark" goes on shipping? Are you talking like... $200?

Depends on their location of course from Az
but they can only ship Oversized via DHL.
They should ship via truck frt.
Or I can ship several sets to one person like Tom or
someone in the PA or Tri state areas and you go pick
them up from him there if they chose to.
that would save alot of $.
That rate can be anywhere from $125-175 is a close
estimate.

[Johnybeas]

gah! dayle! no bumper :( how much for skirts to utah??? My svx is still there as of now.....

[Johnybeas]

ok here are two links that may or may not change your mind.... but it's worth a try...... http://www.subaru-svx.net/photos/user.php?Blu%20Laguna|15540
http://www.subaru-svx.net/photos/user.php?Blu%20Laguna|10196

[Motorsport-SVX]

molds are done
first batch of skirts should be here in about a week..
Email me for more info and or pricing..

Front half spoilers are next :) :)
US made and finally affordable

[Johnybeas]

...Front half spoilers are next :) :)
US made and finally affordable

Any guess on date available?

[Motorsport-SVX]

Any guess on date available?


the sooner we can sell of the sideskirts
the sooner we can start making something else..

[Motorsport-SVX]

first batch is in !
came out pretty good if I say so myself..
think Im going to put a set on my silver car
for demo purposes etc next week...
email us for details
guess we are calling them JDM Alcyone style side skirts.

[Motorsport-SVX]

here are some pics...

[TomsSVX]

first batch is in !
came out pretty good if I say so myself..
think Im going to put a set on my silver car
for demo purposes etc next week...
email us for details
guess we are calling them JDM Alcyone style side skirts.

Look forward to seeing the end product and not just a box!:p:lol:

BTW JDM is tacky anymore... maybe just Alcyone skirts??

Tom

[Motorsport-SVX]

the other side of course...

[Freeman]

Price check!!!

[Motorsport-SVX]

the price is looking to be about $500 for the pair
plus shipping at the moment..
if I can get more people on the boat to committ, the
price will drop of course...
ANYONE truely interested with price not being a factor
should email me to discuss our options.

motorsport_svx@yahoo.com

[Johnybeas]

money money money gosh I wish I was a millionaire. I want these, but I'm not loaded, especially since they still need to be shipped and painted after being purchased. let me know if the price goes down.

[Motorsport-SVX]

anyone who wants some and is going to the big meet
in a few months in PA, should let me know. Im working with
a fellow member on shipping him all pre paid sets and he
will deliver them to you at the Meet ! save over $100 in shipping.
Ill ship all sets together a week before the meet and everyone
can pay a fraction of the actual shipping and save alot of $.
The more we ship at once, the cheaper the shipping gets.

[evilsvx]

is there any way you can make this front and back bumper. i love the side skirts, and also the rear too, but the front is just not to attractive lol pic is attached

[Freeman]

is there any way you can make this front and back bumper. i love the side skirts, and also the rear too, but the front is just not to attractive lol pic is attached

Lol, really? People come and go asking about this as well as saying they're going to have them made.. Only 2 in existance I know of.. Good choice though. I'm holding out for them to be made or I'm going to just go with the 2 piece front end splitters with the Alcyone side skirts.. Gorgeous...

Oh as for your inquiry.. Look up "Cloud" in search I guess..

[evilsvx]

Lol, really? People come and go asking about this as well as saying they're going to have them made.. Only 2 in existance I know of.. Good choice though. I'm holding out for them to be made or I'm going to just go with the 2 piece front end splitters with the Alcyone side skirts.. Gorgeous...

Oh as for your inquiry.. Look up "Cloud" in search I guess..

i did google it. nothin. i will probably go to this speed shop and ask if somehow they can get me or make one $$$$ yeah thats is going to be a lot but it gives a way better look. the side skirts are nice though. im already saving for them

[Freeman]

Oh, not a search engine.. Use the search menu on our site..

You'll get something like this thread..

http://www.subaru-svx.net/forum/showthread.php?t=42458&highlight=cloud

[evilsvx]

Oh, not a search engine.. Use the search menu on our site..

You'll get something like this thread..

http://www.subaru-svx.net/forum/showthread.php?t=42458&highlight=cloud

yeah i did, i saw this thread but i think it was never finish. there is web site for body kits where you can sign up ten people and they do any car http://www.bodykits.org/

[Motorsport-SVX]

is there any way you can make this front and back bumper. i love the side skirts, and also the rear too, but the front is just not to attractive lol pic is attached

If more people would step up and buy the sides
Id continue making more parts.
I have a front half front bumper spoiler on hand Im ready
to clone, just need to see more sales on what we have
before we start making more stuff for it not to sell.

[Freeman]

If more people would step up and buy the sides
Id continue making more parts.
I have a front half front bumper spoiler on hand Im ready
to clone, just need to see more sales on what we have
before we start making more stuff for it not to sell.

Hell, I'd buy a set right now if I had the cash.. They're on my "to do" list.. Now maybe if the price were lower.... ;) lol

[Johnybeas]

Hell, I'd buy a set right now if I had the cash.. They're on my "to do" list.. Now maybe if the price were lower.... ;) lol

+1 on that...
my list is kinda like this...

Finish my new wiring harness for my neons
finish the blue lights conversion
make my halos
Get 8K Hid's to replace my 9006 xenon's
get clear lenses and install halos while lenses are off
get polished intake manifold from nevin and polish and paint my engine cover
get AVIC-F900BT and some subs
get bobby or tom to build my suspension
buy a hydra
get front bumper fiberglass hood n side skirts
buy new pistons cams etc as well as turbo stuff
build motor + turbo
get hydra tune
lambo door conversion


That's kinda my priority order... some things may be moved but as of right now that's kinda the order of things... if I won the lottery all of that would be done right now as well as have my car shipped here so I don't have to drive it across country.

[Johnybeas]

dayle, is that counteroffer price you sent me on ebay still valid for the skirts???
I really would love some skirts... I just am trying to prioritize my spending... and well I gotta factor in getting those beasts painted.

[Motorsport-SVX]

dayle, is that counteroffer price you sent me on ebay still valid for the skirts???
I really would love some skirts... I just am trying to prioritize my spending... and well I gotta factor in getting those beasts painted.


email me directly, thanks

3219500@mswaz.com

[Johnybeas]

how many more skirts do you need to sell before you'll do the kstaff clone

[Motorsport-SVX]

Im having molds built at the moment for a few other
Lexus projects we are doing, when those are done the
front spoiler will get done next. Probably in a few months
time max.
Ill do it sooner if I can get about 10 deposits for anyone
really interested.

[Alex-svx]

I like the K-staff styling for the Svx. And i really want some for my car too. But now i just have to make the car running again.

And i want to say i really like your shop. I have just bye some other stuff for my car, And i cant wait to put this on. :) And i really want to have some styling on my car too. :D

[Johnybeas]

email me directly, thanks

3219500@mswaz.com

hey I sent you a message, get back to me when you get a chance.

[Johnybeas]

any time estimate on the k staff yet id like to do both at once to save on shipping

[Motorsport-SVX]

taking deposits for the front half spoiler
its going to be $380 plus shipping.

which will be oversized and truck frt.
so aprox $125-200 depending on your location.
But if some of you want to ship 2-3 or more to one location
and then distribute them from there, it will save some money
on shipping for everyone.
Est time to make about a month from the time we put it into production.

[Johnybeas]

I might be down for side skirts and front spoiler in the fall, right now I've got almost 2k in repairs and almost 4k in mods planned for the summer plus I got a ton of bills to pay, and still need a job... : (

thanks for doin this I'm really excited! can't wait to get them! they will look awesome with everything else I'm doin!