PDA

View Full Version : stage 2V5 questions


jman050
12-05-2005, 07:04 AM
I searched and It doesnt say on the website but does the stage 2v5 raise the RPM limit to 7400 like the 1v5 does?

SVXRide
12-05-2005, 08:45 AM
I believe that all of ECUTune's SVX chips have this feature - I was under the impression that the rpm limit was only raised to 7000 rpms....
-Bill

jman050
12-05-2005, 09:03 AM
I had thought it was 7000 to but when i checked the ECUtune website it said 7400 for the old stage one so im not sure.

SVXRide
12-05-2005, 10:04 AM
You know, I think you're right...it really only applies to the 5 or 6 spd folks, as the 4HEAT kicks you out at 6500..
-Bill

Earthworm
12-05-2005, 01:01 PM
Mine would cut out at an indicated 7200RPM at best due to the MAF issue. I still only have the Stage 1V3.

jman050
12-05-2005, 02:38 PM
is there anyone that can verify that the 2v5 with MAF allows the rev limit to be raised?

Earthworm
12-05-2005, 03:02 PM
I wish I could. I can't justify the expense at the moment.

TomsSVX
12-05-2005, 03:15 PM
7400 rpm is right... I tend to run it to 7200 or so in 1st gear when I dragged the car... unless you upgrade other parts on the car running at that high rpm is mostly useless

Tom

Phast SVX
12-05-2005, 04:34 PM
7400 rpm is right... I tend to run it to 7200 or so in 1st gear when I dragged the car... unless you upgrade other parts on the car running at that high rpm is mostly useless

Tom


ditto....i reached 6950rpms on the dyno so its been street and dyno varified..
phil