rim size (BOLT PATTERN)

[andivic]

Does anyone know what the bolt pattern of svx stock rim is ?
Anyone think that rim can fit to our svx ?
BOLT PATTERN: 5-LUG 120MM
OFFSET: 41MM

[huck369]

I'm not sure but I believe the SVX uses 5-lug 114mm bolt circle
:rolleyes:

[SVX Superstar]

I have the rims on my SVX that are black how do i know that these are the stok ones I dont no?

[oneothefewproud]

Put a picture in your persaon locker and I am sure everyone of use will be able to tell you in about 2 seconds.

Better yet go look in our personal lockers and see if they are the same ones you have. Maybe someone had them painted black.

Ciao
Wayne

[1994SubaruSVX]

and they will give you the stock bolt pattern. it is real common, i think the post above was correct.

[SVX Superstar]

Originally posted by oneothefewproud
Put a picture in your persaon locker and I am sure everyone of use will be able to tell you in about 2 seconds.

Better yet go look in our personal lockers and see if they are the same ones you have. Maybe someone had them painted black.

Ciao
Wayne

Hey i just figered how to quote a post! now I need som help to get a personnel locker. Is that somthing on the web sight or is that a place to go where we bring our SVX and pictures to meet? I am sorry I am new here.

[wawazat??]

The SVX uses a 5 x 114.3mm (4.5 inches)bolt pattern with a 55 mm offset. The stock wheel has a 16" diameter and is 7.5" wide. It has a centerbore diameter of 56mm. This centerbore and the 55mm offset combine to severly limit the selection of aftermarket wheels.

If you are looking at custom wheels you should try to find a wheel with an offset of at least 45mm to avoid possible wheel bearing issues. By changing the offset you place different load on the wheel bearing. As our wheel bearings appear to be of questionable strength with the stock wheels, you need to be very careful about replacement wheel dimensions.

For more of my ranting, llok at the post about 10-12 below this one titled "17" or 18" wheesl any words of wisdom?"

[1994SubaruSVX]

38mm, and so far so good as far as bearing are concerned. you just have to make sure they dont rub and mine dont. what you can not do is put 8.0 or 8.5 inch wheels because they are too wide.

[Motorsport-SVX]

Originally posted by andivic
Does anyone know what the bolt pattern of svx stock rim is ?
Anyone think that rim can fit to our svx ?
BOLT PATTERN: 5-LUG 120MM
OFFSET: 41MM


Ive been running +40mm offset rims, 18x7 on my SVXs
for 2 yrs now......No prob anywhere. For tires Im using
225-40-18s

www.motorsportwarehouse.com